IPEX
"Labline"
Labline
(Mechanical Joint) has replaced the more expensive and difficult
to install glass and metal systems. Gone is the need for using,
caulking or welding or joints. Joining of the Labline System
is complete in just 30 seconds and once the nut is locked into
place, the end-user is assured of many years of trouble free
service. Yet, because its a mechanical joint, the system can
be easily dismantled and re-used, making it ideal for modular
design and for systems that may require re-modeling in the future.
• |
30
second jointing
- save on installation time. |
• |
Proven
reliability for over 30 years. |
• |
180°F
(80°C) continuous operating temperature. 200°F
(94°C) intermittent use. Can be flushed with boiling
water. |
• |
All
plastic construction
- no galvanic action, electrolysis or corrosion in the
joint. |
• |
Easy
to install, even in difficult areas. |
• |
Mastered
by plumbers in minutes. |
• |
System
changes during installation can be done without spoiling
fittings. |
• |
Can
be disassembled and re-used. |
• |
Ideal
for modular systems. |
• |
Ideal
for remodeling. |
| • |
Matched
system
- high quality pipe and fittings are matched to give ease
of installation and long term reliability. |
| • |
Système
homogène
- les tuyaux et raccords de haute qualité, assortis,
facilitent l'installation tout en assurant un haut degré
de fiabilité à long terme. |
| • |
NSF approved, IAPMO listed & CSA certified, meets
ASTM F1412, D4101 and CSA B181.
|
IPEX "Enfield"
Enfield fittings are molded with an integral resistance wire
in the socket, with jointing completed by energizing the resistance
wire via a microprocessor controlled Enfield Control Unit. The
result of these innovations is an unparalleled level of joint
reliability and repeatability. Enfield has proven over time
that it produces the optimum level of performance where it matters
most, at the joint interface. It offers unprecedented control
of jointing, controlled fit, controlled temperature and controlled
time.
• |
Positive
reliable joints made in two minutes
- installation time reduced. |
• |
Several
joints can be made at one time. |
• |
Proven
reliability for over a decade. |
• |
180°F
(80°C) continuous operating temperature. 200°F
(94°C) intermittent use. Can be flushed with boiling
water. |
• |
Heavy
gauge resistance wire molded into sockets
- no loose components, controlled fusion of joints. |
• |
Easy
connecting heavy duty socket terminal posts complete with
protection ears. |
• |
Microprocessor
controlled Enfusion unit ensures secure joints and joint
repeatability. |
• |
Matched
System- high quality pipe and fittings are matched to
give ease of installation and long term reliability. |
• |
Easy
to install- even in difficult areas. |
• |
Installed
cost 50% less than glass. |
| • |
Breakage
factor eliminated. |
| • |
Maintenance
free. |
| • |
NSF
approved, IAPMO listed & CSA certified, meets ASTM
F1412, D4101 and CSA B181. |
|
|
|
